-
4~20mA フルッシュ弁圧変換器 100MPa シリコン弁圧センサー
BPHT24 4-20mA flush diaphragm pressure sensor transducer BPHT24 Pressure Transmitter Introduction: BPHT24 4-20mA flush diaphragm pressure sensor transducer is based on piezoresistive effect. Inside, there is a layer of diffused silicon film, when subjected to external pressure, the silicon film will undergo small deformation, thereby changing its resistance value. By measuring the change of the resistance value of the silicon film, the pressure of the measured medium can be
-
50.4mm フラッシュ 弁 圧力センサー クランプ 高温トランスミッターを設置
50.4mm clamp to install large diaphragm high temperature transmitter BP93420-IQT High Temperature Flush Pressure Sensor Introduction of flush diaphragm pressure sensor : The diffusion silicon sensor technology has the characteristics of high precision, high stability and high reliability. The clamp flat film structure can adapt to the measurement of a variety of media, has good linearity and repeatability, has a wide operating temperature range, can adapt to the measurement
-
安定型フラッシュ弁圧伝送器 SS304 高精度圧力センサー
Product Description Sanitary chuck connected to pressure transmitter BP93420-IQT Pressure Transmitter Introduction of Flush Diaphragm Pressure Sensor : BP93420-IQT clamp flush diaphragm pressure transmitter is a device used to measure and convert pressure signals. It adopts clamp type flat film sensing technology, which can accurately measure the pressure of various liquids and gases, and has high precision, stability and reliability. It also has a variety of measurement
-
316L 拡散シリコン 圧力センサー クランプ 弁 圧力伝達器
HT Diffused Silicon Pressure Resistance Clamp Diaphragm Pressure Transmitter BP93420-IQ Pressure Transmitter Introduction: BP93420-IQ pressure transmitter utilizes the HT series silicon pressure-resistance isolation oil-filled core as the signal measuring element. It features a full metal flush diaphragm and direct welding with the process connection, ensuring precise connections between the process connection and the measuring diaphragm. The entire product has undergone
-
4-20mA 衛生用洗浄用弁圧センサー BP93420-IQT 空気水油試験用
High temperature Sanitary Flush Diaphragm Pressure Sensor BP93420-IQT For Air Water Oil Test BP93420-IQT Pressure Transmitter Introduction of flush diaphragm pressure sensor: BP93420-IQT 50.4mm clamp to install large diaphragm high temperature transmitter The signal processing circuit is located inside a stainless steel housing, converting the sensor signal into a standard output signal. This pressure transmitter is primarily used in places where high sanitary conditions are
-
304SS フラッシュ 弁圧感センサー 食品飲料用衛生用圧力伝達器
Stainless Steel 4 20mA Sanitary Pressure Transmitter Flush Diaphragm Pressure Sensor BP93420-IQT Pressure Transmitter Introduction of Flush Diaphragm Pressure Sensor: The BP93420-IQT is equipped with a φ50.4mm large diaphragm high-temperature transmitter signal processing circuit, which is installed in a stainless steel housing to convert the sensor signal into a standard output signal. This pressure transducer is primarily used in high sanitary conditions to ensure reliable
-
高温 4-20mA 衛生用圧力トランスミッタ フラッシュ 弁圧トランスミッタ
High Temperature 4-20mA Sanitary Pressure Transmitter Flush Diaphragm Pressure Sensor BP93420-IQT Pressure Transmitter Introduction of Flush Diaphragm Pressure Sensor: The BP93420-IQT pressure transmitter incorporates the HT series silicon pressure-resistance isolation oil-filled core as its signal measuring component. It is designed with a full metal flush diaphragm and directly welded to the process connection, ensuring accurate and reliable connections between the two. The
-
ヘントン 4-20mA 圧力センサー Bp93420-Iqt 飲料食品トランスミッター 中国
Hengtong BP93420-IQT 圧力トランスミッターは、316L ステンレス鋼構造で 0.5% の高い精度を提供します。 IP65等級、広い圧力範囲(-100kPa～3.5MPa)、複数の出力信号を備えています。カスタムオプションが利用できるため、飲料、食品、製薬業界に最適です。
