BP93420DII 石油と化学産業のための差圧伝達機 ミニ差圧センサー
Product Details
| モデル: | BP93420D-II | 範囲: | 0〜10kpa~2Mpa |
|---|---|---|---|
| 出力: | 5VDC 24VDC | 出力: | 0.5-4.5V 4-20mA など |
| 材料: | ステンレス鋼 | スレッド: | 男性または女性のOEM |
| 圧力の種類: | 差圧センサー送信機 | 保護クラス: | IP65 |
| 作業温度: | -10-70℃ | コネクタ: | 大DINかOEM |
| ハイライト |
化学工業 差圧トランスミッター,BP93420DII 差圧トランスミッター,石油差圧トランスミッター |
||
Product Description
BP93420DII 石油と化学産業用差圧伝達器
BP93420DIID差分Pリュッサー送信機
差圧伝達器の導入:
BP93420DII差圧トランスミッタは,分散型シリコンピエゾレシシブセンサーを使用します.測定基質の圧力差がセンサーの両側にある波紋弁に位置している場合センサーチップのウィートストーンブリッジからの信号出力は,圧力差と良好な線形関係があり,圧力差を正確に測定することができます.石油のパイプラインの様々なガスと液体の圧力差の測定に適しています化学,電力,水文などの産業.
製品の特徴差圧トランスミッター::
- 送信機はステンレス鋼構造設計,コンパクトな構造,安装が簡単です.
- 厳格な温度補償と老化スクリーニングの後,安定した信頼性の高いパフォーマンスを確保します.
- 電気インターフェースは外部接続または直接接続である.
| 性能パラメータ差圧トランスミッター: | |
|---|---|
| 測定範囲 | 0〜10KPa...~2MPa |
| 圧力の種類 | 差異 的 圧力 |
| 片側過負荷 | 定数範囲の ≤3倍 |
| 静的圧力 | 最低値は,定数範囲の5倍または7 MPa |
| 精度 @ 25°C | ±0.25% (典型) ±0.5% (最大) |
| 繰り返し可能性 | ±0.03% (典型) ±0.05%FS (最大) |
| ヒステレシス | ±0.03% (典型) ±0.05%FS (最大) |
| 長期 安定性 | ±0.5%F.S/年 ((≤200KPa) ±0.2%F.S/年 ((>200KPa) |
| ゼロ 温度 漂流 | ±0.01%FS/°C ((>100KPa), ±0.02%FS/°C (≤100Kpa) |
| スパン温度変動 | ±0.01%FS/°C ((>100KPa), ±0.02%FS/°C (≤100Kpa) |
| 補償温度 | 0〜50°C ((0〜10KPa,0〜20KPa),0〜70°C,-10〜70°C |
| 動作温度 | -30°C~80°C |
| 貯蔵温度 | -40°C~100°C |
| 振動 | 10g,55Hz 2kHz |
| 住宅用材料 | 304316L |
| 弁膜材料 | 316L |
| 断熱抵抗 | 100MΩ 100VDC |
| 防爆等級 | 本質的に安全で爆発性がある |
| 保護評価 | IP65 |
| 体重 | ~0.45kg |
| 出力信号 | 供給電圧 | 出力型 |
|---|---|---|
| 4×20mA | 12°30VDC | 2/3/4のワイヤ |
| 0°10/20mA |
3本のワイヤ |
|
| 0/1・5V | ||
| 0.5.4.5V | 5VDC |





| 注文のヒント差圧トランスミッター: |
1製品を選択する際には,測定基質が製品の接触部位と互換性があることを確認してください.
2測定点と送信機の間には3つのバルブのマニポルトを設置することが推奨されます.送信機の正圧室と負圧室にゆっくりと均質な圧力を施す.
3設置中に,両端の圧力インターフェースを水平に配置して,設置場所が製品に与える影響を最小限に抑えるのが推奨されます.
4強い振動,即時の衝撃力,強い電磁気干渉,または無線周波数干渉などの特殊な要求のために,私たちの会社に通知し,注文にこれらの要件を指定してください.


Product Highlights
BP93420DII 石油と化学産業用差圧伝達器 BP93420DIID差分Pリュッサー送信機 差圧伝達器の導入: BP93420DII差圧トランスミッタは,分散型シリコンピエゾレシシブセンサーを使用します.測定基質の圧力差がセンサーの両側にある波紋弁に位置している場合センサーチップのウィートストーンブリッジからの信号出力は,圧力差と良好な線形関係があり,圧力差を正確に測定することができます.石油のパイプラインの様々なガスと液体の圧力差の測定に適しています化学,電力,水文などの産業. 製品の特徴差圧トランスミッター:: 送信機はステンレス鋼構造設計,コンパクトな構造,安装が簡単です. 厳格な温...
19mm オイルで満たされた圧力トランスミッター 拡散シリコン圧力トランスミッター 水油試験
Oil Filled Diffused Sillcon Pressure Transmitter Sensor For Water And Oil Test 19mm Silicon Piezoresistive Pressure Sensor Introduction of Pressure Transmitter Sensor: HT19F functions as a silicon piezoresistive pressure sensor ,with a core consisting of a highly stable diffused silicon element,. It effectively measures the pressure of liquids and gases by transmitting the pressure of the tested medium to the silicon diaphragm through an isolation diaphragm and silicon oil
OEM ウォーター オイル フラッシュ 弁 圧力 トランスミッター 飲料 デジタル レベル 圧力 センサー
BP93420-IIIQT1 OEM water oil Beverage glue Flush Diaphragm Pressure Sensor Transmitter BP93420-IIIQT1 Pressure Transmitter Introduction of flush diaphragm pressure sensor: BP93420-IIIQT1 flush-diaphragm pressure sensor transmitter is an analog pressure transmitter with a flat membrane structure, which increases the contact area with the medium. Wide temperature range, overload capacity, strong corrosion resistance, wide application. In order to ensure that this series of
BPHT24-III デジタル圧力トランスミッター フラッシュ 弁 デジタル圧力センサー
Hengtong BPHT24-III Digital Flush diaphragm pressure sensor Transmitter China BPHT24-III Pressure Transmitter Introduction of flush diaphragm pressure sensor transmitter: BPHT24-III pressure transmitter is mainly used in the pressure measurement of viscous liquid mud anti-scaling and anti-crystallization oil shield machine. The whole adopts integrated stainless steel structure, and the two kinds of flat film structure with or without cavity can choose the material in contact
BPZK04-2 圧力スイッチ 電気 24VDC 4-20mA デジタル 圧力スイッチ LCDディスプレイ 電子 圧力スイッチ
24Vdc 4-20MA 2-Point Electronic Pressure Switch Digital Pressure Switch With LCD Display BPZK04-2 Electronic Pressure Switch Introduction: BPK-ZK04-2 electronic pressure switch is a set of pressure measurement, control display, transmission output as one of the full digital control products. It can be used as a signal device when the pressure of non-corrosive gases and liquids reaches a limit value, or as a circuit contact switch for a pressure regulator. The controller is
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.